atm9/client/config/advgenerators-common.toml

[TurbineFuel]
	#Required modules for the machine to function
	Required = ["Turbine:1"]
	#Modules that can connect to the machine
	Modules = ["EfficiencyUpgradeTier2:1", "Control:10", "PowerCapacitor:10", "FuelTank:10", "Turbine:50", "Sensor:10", "PowerOutput:6", "EfficiencyUpgradeTier1:1", "FluidInput:5"]
	#Internal fuel capacity (mB) - this is the base value, expandable by tanks
	#Range: > 1
	InternalFuelCapacity = 1000
	#Internal energy capacity (FE) - this is the base value, expandable by capacitors
	#Range: > 1
	InternalEnergyCapacity = 100000

	#Fuel Efficiency
	[TurbineFuel.FuelEfficiency]
		#Base value
		#Range: 0.0 ~ 100.0
		Base = 1.100000023841858
		#With tier 1 upgrade
		#Range: 0.0 ~ 100.0
		Tier1 = 1.350000023841858
		#With tier 2 upgrade
		#Range: 0.0 ~ 100.0
		Tier2 = 1.850000023841858

[TurbineSteam]
	#Required modules for the machine to function
	Required = ["Turbine:1"]
	#Modules that can connect to the machine
	Modules = ["FluidInput:5", "Control:10", "PowerCapacitor:10", "Turbine:50", "Sensor:10", "PowerOutput:6"]
	#Maximum rotation speed
	#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
	MaxRPM = 5000.0
	#FE/mB
	#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
	SteamEnergyDensity = 2.0
	#Internal steam capacity (mB)
	#Range: > 1
	InternalSteamCapacity = 16000
	#Internal energy capacity (FE) - this is the base value, expandable by capacitors
	#Range: > 1
	InternalEnergyCapacity = 100000

	#Base RPM delta is capped to MaxRPM * InertiaFunctionMultiplier * e^(InertiaFunctionExponent * CurrentRPM / MaxRPM)
	[TurbineSteam.Inertia]
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		InertiaFunctionMultiplier = 0.025
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		InertiaFunctionExponent = -2.0

	#SpinUpMultiplier must be > BaseDragMultiplier + CoilDragMultiplier
	[TurbineSteam.Drag]
		#Affects how fast a turbine spins up to it's target RPM
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		SpinUpMultiplier = 1.0
		#Base constant RPM loss
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		BaseDragMultiplier = 0.2
		#RPM loss when generating power
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		CoilDragMultiplier = 0.75

[SyngasProducer]
	#Required modules for the machine to function
	Required = ["MixingChamber:1"]
	#Modules that can connect to the machine
	Modules = ["FluidInput:5", "FluidOutputSelect:6", "Control:10", "MixingChamber:25", "HeatingChamber:10", "ItemInput:5", "Sensor:10"]
	#Internal steam/water/syngas/carbon capacity
	#Range: > 1
	InternalTankCapacity = 32000
	#Heat level required for conversion to start
	#Range: 1.0 ~ 1.7976931348623157E308
	WorkHeat = 150.0
	#Maximum heat level
	#Range: 1.0 ~ 1.7976931348623157E308
	MaxHeat = 200.0
	#Carbon consumed to produce 1mB of syngas
	#Range: 0.01 ~ 1.7976931348623157E308
	CarbonPerMBSyngas = 50.0
	#Steam consumed to produce 1mB of syngas
	#Range: 0.01 ~ 1.7976931348623157E308
	SteamPerMBSyngas = 10.0
	#Water to steam conversion ratio
	#Range: 0.01 ~ 1.7976931348623157E308
	WaterSteamRatio = 3.0
	#Syngas mB per tick
	#Range: 0.01 ~ 1.7976931348623157E308
	MixingChamberThroughput = 1.0
	#Steam mB per tick
	#Range: 0.01 ~ 1.7976931348623157E308
	HeatingChamberThroughput = 50.0
	#Heat Units per tick
	#Range: 0.001 ~ 1.7976931348623157E308
	HeatingChamberHeating = 0.1
	#Heat Units per tick
	#Range: 0.001 ~ 1.7976931348623157E308
	HeatingChamberLoss = 0.02
	#Carbon consumed per Heat Unit produced
	#Range: 0.1 ~ 1.7976931348623157E308
	CarbonPerHeat = 20.0

[HeatExchanger]
	#Required modules for the machine to function
	Required = ["HeatExchanger:1"]
	#Modules that can connect to the machine
	Modules = ["ItemOutput:6", "FluidInput:5", "Control:10", "FluidOutputSelect:6", "HeatExchanger:50", "ItemInput:5", "Sensor:10"]
	#Range: > -2147483648
	InternalTankCapacity = 16000
	#Should be > StartHeating + (max HeatTransfer), otherwise weirdness will ensue
	#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
	MaxHeat = 1000.0
	#Start heating above this temperature
	#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
	StartHeating = 150.0
	#Decay per tick
	#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
	HeatDecay = 0.05

[Modules]

	[Modules.FuelTank]
		#Capacity (mB)
		#Range: > -2147483648
		Capacity = 16000

	[Modules.HeatExchanger]
		#Heat Units per tick
		#Range: -1.7976931348623157E308 ~ 1.7976931348623157E308
		HeatTransfer = 16.0

	#Turbine module configuration
	[Modules.Turbines]

		#Basic Turbine
		[Modules.Turbines.Tier1]
			#Maximum FE generated per tick
			#Range: > 1
			MaxFEPerTick = 100
			#Maximum FE generated per tick
			#Range: 0.0 ~ 100.0
			Inertia = 1.0

		#Enhanced Turbine
		[Modules.Turbines.Tier2]
			#Maximum FE generated per tick
			#Range: > 1
			MaxFEPerTick = 150
			#Maximum FE generated per tick
			#Range: 0.0 ~ 100.0
			Inertia = 1.1

		#Advanced Turbine
		[Modules.Turbines.Tier3]
			#Maximum FE generated per tick
			#Range: > 1
			MaxFEPerTick = 250
			#Maximum FE generated per tick
			#Range: 0.0 ~ 100.0
			Inertia = 1.2

		#Reinforced Turbine
		[Modules.Turbines.Tier4]
			#Maximum FE generated per tick
			#Range: > 1
			MaxFEPerTick = 500
			#Maximum FE generated per tick
			#Range: 0.0 ~ 100.0
			Inertia = 1.25

		#Composite Turbine
		[Modules.Turbines.Tier5]
			#Maximum FE generated per tick
			#Range: > 1
			MaxFEPerTick = 1000
			#Maximum FE generated per tick
			#Range: 0.0 ~ 100.0
			Inertia = 1.4

	#Capacitor module configuration
	[Modules.Capacitors]

		#Basic Capacitor
		[Modules.Capacitors.Tier1]
			#Capacity (FE)
			#Range: > 1
			Capacity = 1000000

		#Advanced Capacitor
		[Modules.Capacitors.Tier2]
			#Capacity (FE)
			#Range: > 1
			Capacity = 5000000

		#High Density Capacitor
		[Modules.Capacitors.Tier3]
			#Capacity (FE)
			#Range: > 1
			Capacity = 25000000